|
|
Xantrex Trace Solar Inverters
|
Xantrex Trace
Engineering Inverters |
|
Xantrex formerly Trace Engineering, offers inverters for almost every
conceivable application from small power needs to large, 500 watts up to
11,000 watts of continuous power. Xantrex inverters and accessories are fully certified to
North American standards, testing conducted by ETL (Environmental Testing
Laboratories), a fully independent testing company, or by UL (Underwriters
Laboratories).
Summer cabins with modest AC requirements such
as lights and television can get by with the smallest, UX modified sine
wave series
inverters. For full-time homes, farms and ranches requiring greater
amounts of AC power to run water pumps, washing machines, shop tools,
kitchen appliances, and computers, the DR modified sine and SW sine wave series
inverters are widely used. Xantrex has
an inverter that will do the job. |
|
The Xantrex Trace
Inverters:
|
|
(CLICK ON A MODEL NAME BELOW TO GO TO
THAT SPECIFIC PRODUCT.) |
|
SW |
SW Plus |
Utility-Tie PV |
DR |
Power Panel |
|
UX |
|
Power Module |
PM |
PV |
Trace
Xantrex SW Sine Wave
Inverter |
|
 |
2500 to
5500 watts, stackable to 11,000 watts
Sine wave power that will
run most any appliance
Top of the line for larger power
systems
Can run several computers, small air conditioners,
lights, pumps.
|
|
Model |
Efficiency |
DC Voltage
Input |
Continuous Power |
Charger Current |
AC Volts Output |
Our Price |
|
SW4024 |
94% |
24V |
4.0kVA |
120 amp |
120 VAC 60 Hz |
$2699.00 |
|
SW4048 |
95% |
48V |
4.0kVA |
60 amp |
120 VAC 60 Hz |
$2699.00 |
|
SW5548 |
96% |
48V |
5.5kVA |
75 amp |
120 VAC 60 Hz |
$3,095.00 |
|
SWPLUS 2524 |
95% |
24v |
2.5kVA |
70 amp |
120 VAC 60 Hz |
$1797.00 |
|
SWPLUS 2548 |
95% |
48v |
2.5kVA |
70amp |
120 VAC 60 Hz |
$1797.00 |
|
Xantrex
SW Plus Series Sine Wave |
|
 |
Available in 24 and 48-volt versions, it offers continuous power output of
2.5 kW. The SW Plus provides AC power for household appliances and DC
power to charge batteries
The
SW Plus can also be used as part of a backup power system to automatically
provide AC power when utility power fails. For supplementary power either
on or off the grid, the inverter/charger can be programmed to
automatically start and stop a generator, based on user needs. |
|
Model |
Efficiency |
DC Volts
Input |
Continuous Power |
Charger Current |
AC
Volts
Output |
List
Price |
|
SW Plus 2524 |
95 % |
24VDC |
2.5kVA |
70 amp |
120VAC |
$1897.00 |
|
SW Plus 2548 |
95 % |
48VDC |
2.5kVA |
40 amp |
120VAC |
$1897.00 |
|
|
|
|
|
|
|
|
|
SW Plus
5548 |
95 % |
48VDC |
5.5kVA |
70 amp |
120VAC |
$2897.00 |
|
GSM |
Generator Start Module-for automatic starting
option |
$159.00 |
|
SWI |
Stacking option for SW Plus inverters |
$45.00 |
|
PSCB |
Conduit box for PS Series - fits on
DC end of inverter, 1/2", 3/4", and 2" knockouts. Adds 6" |
$95.00
|
|
|
|
Trace
Xantrex PV
Series Inverters
Utility
Tie
Interactive |
|
|
- UL listed, grid interactive
inverters
- 3-phase, 10 kW
- Utility islanding
protection
- Maximum peak power tracking of
the array - User set parameters via the operator
interface
- IEEE 929, UL 1741, IEEE 519,
NEC standards
To
discuss your application call our tech line-
803-980-4320
|
|
Model |
Efficiency |
DC
Volts Input |
Continuous Power |
AC Volts Output
|
Price |
|
PV-10 |
95 % |
300-480VDC |
10kW |
120/208 3
phase |
|
|
PV-15 |
95 % |
300-480VDC |
15kW |
120/208 3
phase |
|
|
PV-20 |
95 % |
300-480VDC |
20kW |
120/208 3
phase |
|
|
Xantrex
/ Trace DR
Series Inverters |
|
 |
-For medium sized power systems
-Modified
sine wave output
-Can run 2 or more computers,
refrigerators and med. sized appliances, power tools, freezer
-Options include remote control panel, series operation
interface cable and battery temperature sensor
|
|
Model |
Efficiency |
DC Volts Input |
Continuous Power |
Charger Current |
AC Volts
Output |
Our Price |
|
DR1512 |
94% |
12V |
1.5 kVA |
70 amp |
120VAC
60Hz |
call |
|
DR2412 |
94% |
12V |
2.5 kVA |
120 amp |
120VAC
60Hz |
Long Lead Times |
|
DR1524 |
94% |
24V |
1.5 kVA |
35 amp |
120VAC
60Hz |
call |
|
DR2424 |
95% |
24V |
2.5 kVA |
70 amp |
120VAC
60Hz |
call |
|
DR3624 |
95% |
24V |
3.6 kVA |
70 amp |
120VAC
60Hz |
call |
|
DRI |
Stacking Interface |
$85.00 |
|
DRCB |
Conduit Box for DR Series.
Fits DC and / or AC end of inverter |
$69.00 |
|
UX Series Inverter |
|
 |
-500 to 1400 watts inverter
and battery charger
-For small to medium size systems
-Great for
phone systems and small offices
-Can run 2 or more computers, small
refrigerators, and medium sized appliances
-Options include standby,
remote control, and battery temperature sensor
-Modified sine wave
output
|
|
Model |
Efficiency |
DC
Volts Input |
Continuous Power |
Charger Current |
AC Volts
Output |
LxWxH |
Our Price |
|
UX612 |
92% |
12V |
.6 kVA |
N/A |
120 VAC 60
Hz |
6"x15.5"x10.5" |
$490.00 |
|
UX612SB* |
92% |
12V |
.6 kVA |
25 amp |
120 VAC 60
Hz |
6"x15.5"x10.5" |
$575.00 |
|
UX1112 |
90% |
12V |
1.1 kVA |
N/A |
120 VAC 60
Hz |
6"x15.5"x10.5" |
$655.00 |
|
U1112SB* |
90% |
12V |
1.1 kVA |
35 amp |
120 VAC 60
Hz |
6"x15.5"x10.5" |
$735.00 |
|
UX1412 |
92% |
12V |
1.4 kVA |
N/A |
120 VAC 60 Hz |
6"x15.5"x10.5" |
$695.00 |
|
UX1412SB* |
92% |
12V |
1.4 kVA |
50 amp |
120 VAC 60 Hz |
6"x15.5"x10.5" |
$775.00 |
|
Xantrex
/ Trace Power
Module Series |
|
 |
-Complete power packages designed to permit seamless
system integration. The modules allow isolation of components, wiring and
safety circuitry in a lockable cabinet. Inverters not
included.
-Features:
-C40 charge
controllers, up to 3 per individual Power Module
-AC & DC over
current protection breakers
-Indoor or outdoor enclosures with or
without locks
-Stainless steel mounting hardware
-DC ground fault
protection
-Wiring for batteries and all input and output connectors
-UL listed enclosure and component
|
|
Model |
Type of
inverters |
inverters |
Breakers |
Max# AC
Breakers |
List
Price |
|
PM-SW250/S |
SW4024,SW5548 |
1 |
3 |
4 |
$1,120.00 |
|
PM-SW250/D |
SW4024,SW5548 |
2 |
7 |
8 |
$1,845.00 |
|
PM-SW175/S |
SW4048 |
1 |
3 |
4 |
$1,120.00 |
|
PM-SW175/D |
SW4048 |
2 |
7 |
8 |
$1,845.00 |
|
PM-DR250/S |
DR2412, DR3624 |
1 |
3 |
4 |
$1,120.00 |
|
PM-DR250/D |
DR2412, DR3624 |
2 |
2 |
1 |
$1,545.00 |
|
PM-DR175/S |
DR2512, DR1524, DR2424 |
1 |
3 |
4 |
$1,120.00 |
|
PM-DR175/D |
DR2512, DR1524, DR2424 |
1 |
2 |
1 |
$1,545.00 |
|
Options |
|
PM
Base |
Power Module
w/o electrical components for a stand-alone vented cabinet |
$495.00 |
|
PM-ADD |
Add to Power
Module configurations for sealed batteries |
$395.00 |
|
PM-EXT |
Add to base
Power Module for use with taller batteries |
$295.00 |
|
PMO-C40 |
C40
charge/load/diversion controller installed in the Power Module |
$255.00 |
|
PMO-VLC40 |
VLC40 / voltage
limiting controller installed in the Power Module |
$295.00 |
|
PMO-C40K |
Installation
kit for a C40 charge/load/diversion controller |
$65.00 |
|
PMO-ODTEK |
Outdoor/tropical environment kit |
$80.00 |
|
PMO-LOCKS |
Lock kits one
front door, includes two keys |
$45.00 |
|
PMO-GFP |
Ground fault
protection disconnects and short circuits the solar array |
$275.00 |
|
PMO-TRAY |
Fiberglass
battery tray for Power Module |
$65.00 |
|
PMO-FEET |
Feet for
securing Power Module stack to ground |
$100.00 |
|
PMO-COVER |
Additional
breaker covers, includes two covers and two sets breaker sliders |
$30.00 |
|
PM
Series |
|
|
- 3
Sine-Wave inverters in a stacked 3 module pre-wired
system
- 3-stage battery system
- 3-phase monitoring software
- SWCA and automatic AC transfer relay
- For stand-alone or utility-interactive
applications
- 19" deep x 34" wide x 57" high, 527 to 560 lbs.
depending on model
|
|
Model |
Continuous Power |
AC Volts Output
|
List
Price |
|
PM-SW5548/3PH |
16.5kVA (5.5 kVA per
phase) |
120/208 3 phase |
$17,125.00 |
|
PM-SW4048/3PH |
12kVA (4.0 kVA per
phase) |
120/208 3 phase |
$15,457.00 |
|
PM-SW4548E/3PH |
13.5kVA (4.5 kVA per
phase) |
120/208 3 phase |
$17,125.00 |
|
PM-SW3048/3PH |
10.0kVA (3.3 kVA per
phase) |
120/208 3 phase |
$15,457.00 |
|
SW-3PH
|
One spare three phase SW inverter
chip set |
$125.00
|
|
XANTREX Power
Panel Series |
|
 |
Power Panels are less expensive than on-site
component installation and meet many power application needs. To
install Power Panels, simply connect them to the battery, PV, and or AC
loads. Power Panels include inverters and are assembled by Trace
with components specified by the customer.
Features:
-One or two Trace SW or DR inverters
-Powder coated steel
back-plate pre-wired with all NEC/UL requirements, AC & DC over
current protection and disconnects; only for indoor installation
-Single or dual C40 charge controllers for use with DC charging
sources
-60 amp AC system bypass that allows inverter servicing while
keeping AC loads connected to the grid or generator
|
|
Model |
DC Voltage Input |
Continuous Power
|
Charger Current
|
AC Volts Output
|
Great
Price |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PP-SW4024/S
|
24V
|
4.0 KVA |
120 A
|
120VAC 60Hz
|
$3,895.00 |
|
PP-SW4024/D |
24v |
8.KVA |
60A |
120/240VAC 60Hz |
$6,895.00 |
|
PP-SW4048/S |
48 VDC |
4.0 KVA |
60 A |
120 VAC 60 Hz |
$3,995.00 |
|
PP-SW4048D |
48 VDC |
8.0 KVA |
60 A x 2 |
120/240 VAC
60Hz |
$7,095.00 |
|
PP-DR3624/S
|
24V
|
3.6 KVA
|
70 A
|
120VAC 60 Hz
|
$2,009.00 |
|
PP-DR2424/S
|
24V
|
2.4 KVA
|
70 A
|
120VAC 60Hz
|
$1,825.00 |
|
PP-DR1524/S
|
24V
|
1.5 KVA
|
35 A
|
120VAC 60Hz
|
$1,469.00 |
|
Options
|
|
PPO-C40
|
C40 DC
charge/load/diversion controller, installed complete with prewired 60 amp
DC breaker |
$218.00 |
|
PPO-DVM/C40 |
Accumulating
amp hour meter with LCD display, installed on the front of the C40
|
$89.00 |
|
PPO-CD15
|
15 amp DC load
breaker, prewired and installed in the DC disconnect
|
$59.00 |
|
PPO-CD20
|
20 amp DC load
breaker, prewired and installed in the DC disconnect
|
$59.00 |
|
PPO-CD60
|
60 amp DC load
breaker, prewired and installed in the DC disconnect
|
$59.00 |
|
PPO-BC5-2/0 |
5 ft., 2/0 AWG
battery cable pair w/ ring terminals (battery side only) and 2 ft.
flexible conduit |
$63.00 |
|
PPO-BC10-2/0 |
10 ft., 2/0 AWG
battery cable pair w/ring terminals (battery side only) and 7 ft. flexible
conduit |
$112.00 |
|
PPO-BC5-4/0 |
5 ft., 4/0 AWG
battery cable pair w/ring terminals (battery side only) and 2 ft. flexible
conduit |
$99.00 |
|
PPO-BC10-4/0 |
10 ft., 4/0 AWG
battery cable pair w/ring terminals (battery side only) and 7 ft. flexible
conduit |
$152.00 |
|
PPO-BC15-4/0 |
15ft., 4/0 AWG
battery cable pair w/ring terminals (battery side only) and 12 ft. flex.
conduit |
$220.00 |
|
PPO-SB
|
Heavy duty
plastic shipping container |
$359.00 |
|
Xantrex
AC to DC
Converter (XADC) |
click on image to enlarge |
Quick battery
charging and safer DC power distribution for RVs. XADC is the perfect DC
power source for the most demanding RVs. |
|
The Xantrex AC to DC
Converter (XADC) is a complete family of advanced converter/chargers
designed for today’s power-hungry RV. With up to 80 amps of output, the XADC
features true three-stage battery charging for fast recharge times and
longer battery life. The XADC is the first converter on the market with
power-factor corrected charging (PFC), significantly reducing AC power draw,
while making more power available to receptacle loads and air conditioning.
Replaceable fuses,
standard footprint sizes, and accessible terminal buses ensure the XADC is
easy to install and service. The XADC has been designed and tested to meet
the stringent requirements of UL 458 and FCC (Class B) regulations. This
ensures it installs safely into any RV and runs quietly, minimizing
interference with radios, televisions and wireless devices.
The XADC is
available with an optional AC/DC electrical panel for a truly integrated
power distribution solution. The panel and converter can be mounted together
or separately for maximum flexibility when selecting an installation
location. Featuring up to 10 single or dual AC breakers and 11 DC circuits,
this panel can be configured to safely accommodate any electrical set-up
required.
Converter Features
-
Three models with 40, 60
or 80 Adc output
-
Microprocessor
controlled, multi-stage battery charger
-
Power-factor-corrected
charging significantly reduces AC draw needed for charging
-
Easy, three-lead
connection from converter to panel, and converter to battery
-
Wide range of input
voltages and frequencies (90-140 Vac, 50-70Hz)
-
Recharges completely
“dead” batteries (0 volts)
-
Input and output
ventilation located on same side for maximum cooling
-
Ultra-quiet fan
operation allows cabin-vented installations without fan noise
Electrical
Panel Features
-
Two models available
with 30 or 50 A distribution (identical footprints)
-
Both AC and DC
connections in one panel for fast and easy installation
-
Stackable panel and
converter lock together into a single unit for serviceable,
cabin-facing installations
-
Accepts dual “stab-lok”
style double breakers for maximum number of AC output branches at
minimal cost (eight for 30A panel, 10 for 50A panel)
-
Accepts 11 standard auto
style DC fuses
-
Includes seven AC
knockout and seven DC knockouts. All knockouts can be opened
to either 1/2 inch trade size or 3/4 inch (nested)
-
Removable DC fuse board
for ease of wiring
|
|
**Please contact us at SC Solar for pricing or
further information** |
|
|
For sales and Technical assistance call 704-583-0016
|
